Updated Sep-2021 Test Engine or PDF for the Nutanix NCSC-Level-1 test to help you quickly prepare for the Nutanix exam!
Full NCSC-Level-1 Practice Test and 80 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 48
A consultant is imaging a Nutanix cluster with VMware ESXi. Foundation returns an error that the media is not a supported ISO. The consultant checks the whitelist file in Foundation and confirms that the version of the ISO is not listed.
Which three actions should the consultant take to resolve this issue? (Choose three.)
- A. Restart the imaging process in Foundation.
- B. Obtain the MD5 checksum of the ISO and confirm MD5 checksum of ISO is listed.
- C. Edit the whitelist file in Foundation.
- D. Replace and save whitelist file in Foundation
- E. Download the iso_whitelist.json from the Support portal.
Answer: B,D,E
NEW QUESTION 49
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Configure the static IP address through the desktop virtualization software.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 50
What reference materials should be provided to the customer during the Knowledge Transfer?
- A. As-Built Guide, technical slides and checklist, Network Diagram
- B. As-Built Guide, Project Plan, links to documentation and resources
- C. As-Built Guide, technical slides and checklist, links to documentation and resources
- D. Questionnaire, technical slides and checklist, links to documentation and resources
Answer: C
NEW QUESTION 51
A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.
Which command should the consultant use?
- A. cluster -c IP_CVM_A, IP_CVM_B, IP_CVM_n
- B. cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n
- C. cluster -s IP_CVM_A, IP_CVM_B, IP_CVM_n create_manual
- D. cluster -s IP_CVM_M, IP_CVM_B, IP_CVM_n create
Answer: B
NEW QUESTION 52
After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?
- A. Check the hypervisor version in the Nutanix Compatibility Matrix.
- B. Download the hypervisor ISO again from the vendor website.
- C. Restart the Foundation process and upload the hypervisor again.
- D. Download the latest hypervisor ISO whitelist file from Nutanix portal.
Answer: D
NEW QUESTION 53
After deploying an AHV cluster connected to Cisco Nexus 9k switches, unexpected network behavior is observed. The consultant needs to rule out physical network mis-cabling without returning to the datacenter.
Which command from the host should the consultant run?
- A. show lldp neighbors
- B. show interfaces
- C. show cdp neighbors
- D. lldpctl
Answer: D
NEW QUESTION 54
After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?
- A. change_cvm_vlan 0
ovs-vsctl set port br0 tag=0
ovs-vsctl set port br0-up bond_mode=balance-tcp - B. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-slb - D. change_cvm_vlan 0
ovs~vsctl set port br0 tag=0
ovs~vsctl set port br0-up bond_mode=active-backup
Answer: A
NEW QUESTION 55
Refer to the exhibit.
A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?
- A. Update the Foundation whitelist from the support portal.
- B. Upload ESXi image to /home/Nutanix/foundation/nos/hypervisor/esx.
- C. Upload ESXi image to /home/Nutanix/foundation/isos/hypervisor/esx.
- D. Restart Foundation VM and refresh Foundation page.
Answer: C
NEW QUESTION 56
A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?
- A. If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.
- B. Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.
- C. Verify that IPv6 Link Local and DHCP is enabled on all switch ports.
- D. If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.
Answer: D
NEW QUESTION 57
A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?
- A. A Container-level whitelist entry was configured.
- B. A Global whitelist entry was configured.
- C. Compression was turned on for all containers.
- D. Deduplication was turned on for all containers.
Answer: B
NEW QUESTION 58
A consultant configures an ESXi cluster which will utilize a vSphere Distributed Switch (vDS). The consultant has just migrated the first host to the dvSwitch when several alerts appear within Prism Element regarding Host-to-CVM connectivity.
What is causing these alerts?
- A. The consultant migrated the CVM Backplane and VM network adapter over to the vDS.
- B. The consultant migrated the CVM Backplane network adapter over to the vDS.
- C. VLAN tags are incorrectly configured on the vDS port groups.
- D. The consultant migrated the CVM svm-iscsi-pg network adapter over to the vDS.
Answer: B
NEW QUESTION 59
In a 20-node ESXi deployment, the customer needs additional resiliency to survive the loss of two nodes concurrently.
Which configuration should the consultant use to ensure that the appropriate resources are available?
- A. Storage reservation for 5%; HA admission control for 5%, cluster RF2
- B. Storage reservation for 10%; HA admission control for 10%, cluster RF2
- C. Storage reservation for 10%; HA admission control for 10%, cluster RF3
- D. Storage reservation for 5%; HA admission control for 5%, cluster RF3
Answer: C
NEW QUESTION 60
A consultant creates a Nutanix cluster using the 10.10.10.0/24 network and VLAN 10. The customer creates a VM network inside the Prism using VLAN 20. The customer starts to create VMs but is unable to ping the default gateway from these new systems.
What is causing the issue?
- A. Only one VLAN is supported on AHV.
- B. The CVM/hypervisor must be on an untagged VLAN.
- C. The switch port is not set up as a trunk.
- D. The CVM/hypervisor cannot use the same VLAN as guest VMs.
Answer: C
NEW QUESTION 61
For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?
- A. ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000 - B. ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. ovs-vsctl set port br0-up bond_mode=balance-slb
- D. ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10
Answer: D
NEW QUESTION 62
While preparing for a new four-node cluster installation, the consultant has a Tech Review Call with the customer. The hardware is as follows:
* 4 nodes in 1 Block
* 8 x 10 GbE Ports
* 4 x 1 GbE IPMI Ports
* Adequate Ethernet ports are available
* Ethernet cables are correct and available
* Adequate rack space is available
Which remaining item must be confirmed as available onsite?
- A. Redundant 208v power
- B. Crash Cart
- C. Redundant 110v power
- D. Fibre Channel switches
Answer: A
NEW QUESTION 63
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A. Route based on originating port ID
- B. Route based on source MAC hash
- C. Route based on physical NIC load
- D. Route based on IP hash
Answer: A
NEW QUESTION 64
A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8. The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?
- A. Use Prism Element to Expand the cluster and select the re-image option.
- B. Upgrade the cluster to 5.9 and add the node through Prism Element.
- C. Use Prism Element, which will downgrade the node by default during the node add process.
- D. Use the CLI and enter cluster add-node node-serial="node_serial".
Answer: A
NEW QUESTION 65
Where in the Support Portal is the Best Practices guide for vSphere Networking located?
- A. Knowledge Base
- B. Software Documentation
- C. Product Notices
- D. Solutions Documentation
Answer: D
NEW QUESTION 66
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 67
A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?
- A. The NICs are connected for balance-slb.
- B. The VLANs are configured correctly on the switch or tagged on the cluster.
- C. The other two 10GbE connections are removed from the default bond.
- D. The NICs are configured for active-backup.
Answer: D
NEW QUESTION 68
Refer to the exhibit.
A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?
- A. Network Segmentation
- B. Multi-homing
- C. Link Aggregation
- D. Range Autofill
Answer: B
NEW QUESTION 69
......
Full NCSC-Level-1 Practice Test and 80 unique questions with explanations waiting just for you, get it now: https://www.examdumpsvce.com/NCSC-Level-1-valid-exam-dumps.html
