Cisco 350-801 Real 2024 Braindumps Mock Exam Dumps [Q61-Q77]

Share

Cisco 350-801 Real 2024 Braindumps Mock Exam Dumps

350-801 Exam Questions | Real 350-801 Practice Dumps


Further Certification Path

Cisco Collaboration is a broad certification path that includes a series of exams at the professional and expert levels. If you are only getting started in this field, getting the CCNP Collaboration certificate would make more sense. Thereafter, you may proceed to attain the CCIE Collaboration certification after acing the lab exam.


Cisco 350-801 certification is a valuable credential for professionals in the collaboration technology field. It demonstrates the candidate’s expertise in implementing and operating Cisco collaboration core technologies and validates their ability to design, deploy, and troubleshoot Cisco collaboration solutions. Implementing and Operating Cisco Collaboration Core Technologies certification also helps professionals stand out in the job market and offers opportunities for career growth and advancement.

 

NEW QUESTION # 61
A SIP phone has been configured in the system with MAC address 0030.96D2.D5CB. The phone retrieves the configuration file from the Cisco UCM. Which naming format is the file that is downloaded?

  • A. SIP0030406706705.cnf
  • B. SEP0030406706705.cnf
  • C. SEP003096D2D5CB.cnf.xml
  • D. SIP003096D2D5CB.cnf.xml

Answer: C

Explanation:
All phones in CUCM are SEP, as in Selsius Ethernet Phone.


NEW QUESTION # 62
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as 011841234567?
A)

B)

C)

D)

  • A. Option C
  • B. Option A
  • C. Option D
  • D. Option B

Answer: B


NEW QUESTION # 63
User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)

  • A. Incompatible codec
  • B. Incorrect partition
  • C. Incorrect QoS
  • D. Network congestion
  • E. No region relationship

Answer: C,D


NEW QUESTION # 64
Refer to the exhibit. A collaboration engineer configures Cisco UCM to act as a DHCP server.
What must be done next to configure the DHCP server?

  • A. Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability.
  • B. Add a DHCP subnet to the DHCP server under Cisco UCM Administration
  • C. Restart the TFTP service under Cisco Unified Serviceability
  • D. Add the new DHCP server to the primary DNS server

Answer: B

Explanation:
https://www.ccexpert.us/cisco-unified/cucm-initial-
configuration.html#:~:text=Configure%20the%20DHCP%20server%20from%20the%20CUCM%2
0Administration,page%20will%20display.%20Click%20the%20Add%20New%20button


NEW QUESTION # 65
A Cisco IP Phone 7841 that is registered to a Cisco Unified Communications Manager with default configuration receives a call setup message. Which codec is negotiated when the SDP offer includes this line of text?
M=audio 498181 RTP/AVP 0 8 97

  • A. G.711alaw
  • B. G.722
  • C. G.711ulaw
  • D. iLBC

Answer: C


NEW QUESTION # 66
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider. Which set of commands allows the engineer to complete the task without compromising voice quality?

  • A. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec aacld
  • B. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec mp4a-latm
  • C. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec ilbc mode 20
  • D. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/cube- codec-basic.html


NEW QUESTION # 67
An administrator executes the debug isdn q931 command while debugging a failed call.
After a test call is placed, the logs return a disconnect cause code of 1.
What is the cause of this problem?

  • A. The media resource is unavailable
  • B. The dialed number is not assigned to an endpoint
  • C. The destination number is busy
  • D. The destination number rejects the call

Answer: B

Explanation:
https://www.cisco.com/c/en/us/support/docs/dial-access/integrated-services-digital-networks-isdn- channel-associated-signaling-cas/8607-isdn-disc- code.html


NEW QUESTION # 68
Which filed is configured to change the caller ID information on a SIP route pattern?

  • A. Calling party Transformation Mask
  • B. Route partition
  • C. Connected Line ID Presentation
  • D. Called party Transformation Mask

Answer: A


NEW QUESTION # 69
Which action is required if an engineer wants to have Cisco Unified Communications Manager control the configuration for an MGCP gateway?

  • A. Upload the custom configuration in the TFTP server in Cisco Unified CM.
  • B. Configure the Cisco Unified CM's IP in voice service VoIP.
  • C. Apply the ccm-manager configuration commands to the gateway.
  • D. From Cisco Unified CM > Device > Gateway > Add gateway, check the auto-configuration check box.

Answer: D


NEW QUESTION # 70
How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified Communications Manager?

  • A. Add the requirements for each audio and video codec and multiply how many calls must be supported.
  • B. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.
  • C. Set the requirements in the service parameters.
  • D. Execute the Resource Reservation Protocol to return location-based requirements.

Answer: C

Explanation:
Section: QoS
Explanation


NEW QUESTION # 71
Refer to the exhibit.

You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

  • A. The DNS record type should be changed from SRV to A.
  • B. The DNS record should be created for _ cisco-uds._tcp example.com.
  • C. Server 4.2.2.2 is not a valid DNS server.
  • D. The DNS record should be changed from _collab-edge._tls example.com.

Answer: D


NEW QUESTION # 72
Which two protocols are proxied over an Expressway-E/C pair when a MRA login including phone services is performed? (Choose two.)

  • A. SIP
  • B. HTTPS
  • C. SRTP
  • D. SCCP
  • E. H.323

Answer: A,B


NEW QUESTION # 73
Refer to the exhibit. An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit.
Which audio codec is selected il a call between two endpoints in Region 1 is placed?

  • A. G.729
  • B. G.722
  • C. G.711a
  • D. G.711u

Answer: B


NEW QUESTION # 74
What dialed number match this cisco UCM route pattern?
1[23]XX

  • A. 1200 through 1300 only
  • B. 1200 through 1399 only
  • C. 1230 through 1239 only
  • D. 12300 through 12399 only

Answer: B


NEW QUESTION # 75
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed.
Where does the engineer go to remove the inactive custom panel?

  • A. The phone configuration page in CUCM Administration
  • B. The software Upgrades page in CUCM OS Administration
  • C. The In-Room control Editor on the webpage of the MX800
  • D. The SIP Trunk security profile page in CUCM Administration

Answer: C


NEW QUESTION # 76
Refer to the exhibit.


Refer to the exhibit. A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?

  • A. Restart the TFTP service under Cisco Unified Serviceability.
  • B. Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability
  • C. Add a DHCP subnet to the DHCP server under Cisco UCM Administration.
  • D. Add the new DHCP server to the primary DNS server

Answer: C


NEW QUESTION # 77
......

Verified 350-801 Exam Dumps Q&As - Provide 350-801 with Correct Answers: https://www.examdumpsvce.com/350-801-valid-exam-dumps.html

Pass Your 350-801 Dumps Free Latest Cisco Practice Tests: https://drive.google.com/open?id=15w2BLmSIdw33c6xBcO82FlcQITy85qvL