Use Free 300-620 Exam Questions that Stimulates Actual EXAM
Get 100% Real 300-620 Free Online Practice Test
NEW QUESTION 87
A network engineer must backup the PRODUCTION tenant. The configuration backup should be stored on the APIC using a markup language and contain all secure information. Which export policy must be used to meet these requirement?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option D
Answer: C
NEW QUESTION 88
Which new construct must a user create when configuring in-band management?
- A. management tenant
- B. management contract
- C. VLAN pool
- D. bridge domain
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_KB_Configuring_Static_Management_Access.html
NEW QUESTION 89
What are two descriptions of ACI multi-site? (Choose two.)
- A. The Inter-Site network routers should run OSPF to establish peering with the spines.
- B. ACI Multi-Site is a solution that allows one APIC cluster to manage multiple ACI sites
- C. Routers in the inter-Site network must run OSPF. DHCP relay, and MP-BGP
- D. ACI Multi-Site is a solution that supports a dedicated APIC cluster per site
- E. The Multi-Site orchestrator must be directly attached to one ACI leaf.
Answer: A,D
NEW QUESTION 90
Which new construct must a user create when configuring in-band management?
- A. management tenant
- B. management contract
- C. VLAN pool
- D. bridge domain
Answer: C
NEW QUESTION 91
An application team tells the Cisco ACI network administrator that it wants to monitor the statistics of the unicast and BUM traffic that are seen in a certain EPG. Which statement describes the collection statistics?
- A. All EPGs in the Cisco ACI tenant object must be enabled for statistics to be collected.
- B. The collection of statistics is enabled on the EPG level by enabling the statistics for unicast and BUM traffic.
- C. Cisco ACI does not capture statistics at the EPG level. Only statistics that pass through ACI contracts can be monitored.
- D. EPG statistics can be collected only for VMM domains. If a physical domain exists, statistics are not collected.
Answer: A
NEW QUESTION 92
An engineer needs to deploy a leaf access port policy group in ACI Fabric to support the following requirements:
* Control the amount of application data flowing into the system
* Allow the newly connected device to auto-negotiate link speed with the leaf switch Which two ACI policies must be configured to achieve these requirements? (Choose two.)
- A. link level policy
- B. L2 interface policy
- C. ingress data plane policing policy
- D. ingress control plane policing policy
- E. slow drain policy
Answer: A,C
Explanation:
Explanation
Slow Drain handles FCoE packets that are causing traffic congestion on ACI fabric. So, it is wrong.
Ingress control plane is wrong, because the request is for "application data flowing".
L2 interface policy is concerned about QinQ and VLAN scope.
NEW QUESTION 93
Which components must be configured for the BGP Route Reflector policy to take effect?
- A. spine fabric interface overrides and profiles
- B. pod policy groups and profiles
- C. leaf fabric interface overrides and profiles
- D. access policies and profiles
Answer: A
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco- APIC-Layer-3-Networking-Configuration-Guide-401/Cisco-APIC-Layer-3-Networking-Configuration-Guide-
401_chapter_01.html
NEW QUESTION 94
A network engineer configures the Cisco ACI fabric to connect to vCenter with these requirements:
Port groups must be automatically created on the distributed virtual switch.
Port groups must use the VLAN allocation in the range between 20-30.
The deployment must optimize the CAM space on the leaf switches.
Which set of actions meets these criteria?
- A. Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand. - B. Create a static VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate. - C. Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand. - D. Create a static VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate.
Answer: C
NEW QUESTION 95
A customer must deploy three Cisco ACI based data centers. Each site must be separated from the others. Which characteristic of Cisco ACI Multi-Pod makes it unsuitable for this deployment?
- A. creates a virtual pod in the remote location
- B. has distance and scale limitations
- C. places leaf switches in the remote site that belong to the same fabric as at the headquarters site
- D. requires all pods to share the same Cisco APIC cluster
Answer: D
NEW QUESTION 96
Which two components are essential parts of a Cisco ACI Virtual Machine Manager (VMM) domain policy configuration? (Choose two.)
- A. EPG association
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_01011.html#concept_74EFC437C0AA44A391676F70ACE59DF3
- B. Layer 3 outside interface association
- C. IP address pool association
- D. EPG static port binding
- E. VMM domain profile
Answer: A,E
NEW QUESTION 97
What must be configured to redistribute externally learned OSPF routes within the ACI fabric?
- A. BGP Inter-leak Route Map
- B. PIM Sparse Mode
- C. BGP Route Reflector
- D. Route Control Profile
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html
NEW QUESTION 98
A network engineer demonstrates Cisco ACI to a customer. One of the test cases is to validate a disaster recovery event by resetting the ACI fabric to factory and then restoring the fabric to the state it was in before the event. Which setting must be enabled on ACI to export all configuration parameters that are necessary to meet these requirements?
- A. enabled AES encryption
- B. generated a tech-support file
- C. enabled JSON format export
- D. encrypted export destination
Answer: A
NEW QUESTION 99
Refer to the exhibit.
Refer to the exhibit. An engineer is configuring a production Multi-Site solution to provide connectivity from EPGs from a specific site to networks reachable through a remote site L3OUT. All required schema and template objects are already defined. Which additional configuration must be implemented in the Multi-Site Orchestrator to support the cross-site connectivity?
- A. Add a new stretched external EPG to the existing L3OUT.
- B. Implement a policy-based redirect using a service graph.
- C. Configure a routable TEP pool for SITE1.
- D. Enable CloudSec for intersite traffic encryption.
Answer: A
Explanation:
in order to provide connectivity from EPGs from a specific site to networks reachable through a remote site L3OUT, a new stretched external EPG must be added to the existing L3OUT.
NEW QUESTION 100
Which method does the Cisco ACI fabric use to load-balance multidestination traffic?
- A. forwarding tag trees
- B. spanning trees
- C. shortest-path trees
- D. PIM routing
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamenta
NEW QUESTION 101
Refer to the exhibit.
A Cisco ACI fabric is newly deployed, and the security team requires more visibility of all inter-EPG traffic flows. All traffic in a VRF must be forwarded to an existing firewall pair. During fallover, the standby firewall must continue to use the same IP and MAC as the primary firewall. Drag and drop the steps from the left Into the Implementation order on the right to configure the service graph that meets the requirements. (Not all steps are used.)
Answer:
Explanation:
NEW QUESTION 102
......
BEST Verified Cisco 300-620 Exam Questions (2023) : https://www.examdumpsvce.com/300-620-valid-exam-dumps.html
The Best Practice Test Preparation for the 300-620 Certification Exam: https://drive.google.com/open?id=1mP0Mt2mpnpCa5UYVV43cVOYkj2BMhOU2
