[Sep-2021] HPE0-V14 Pre-Exam Practice Tests | Exam Questions and Answers for HPE ATP - Hybrid IT Solutions V2 Study Guide
Building HPE Hybrid IT Solutions Certification Sample Questions
NEW QUESTION 12
Refer to the exhibit.
A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)
- A. HPE StoreOnce Gen4 16Gb Fibre Channel Network Card
- B. HPE StoreOnce Cloud Bank Storage
- C. HPE D3710 Storage Enclosure
- D. HPE StoreOnce 3620 24TB Capacity Upgrade Kit
- E. HPE StoreOnce Gen4 10/25Gb SFP Network card
Answer: B,D
Explanation:
Reference: https://www.hpe.com/uk/en/product-catalog/storage/disk-based-backup-systems/ pip.specifications.hpe-storeonce-systems.1011014655.html
NEW QUESTION 13
Match each workload profile description with the corresponding profile. (Select all that apply.)
Answer:
Explanation:
Explanation
Missing Critical - Large number of database operations
Transactional Application Processing - Trades performance for reliability General Peak Frequency Compute - Maximize processor speed
NEW QUESTION 14
A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst What should they implement within their backups software to minimize the network load on the remote site?
- A. target-side deduplication
- B. source-side deduplication
- C. thin provisioning
- D. native compression
Answer: B
NEW QUESTION 15
A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?
- A. Smart Storage Administrator
- B. HPE SmartStart
- C. HPE SSA Diagnostics
- D. Intelligent Provisioning
Answer: D
Explanation:
Reference:
https://community.hpe.com/t5/Alliances/Get-HPE-Gen10-Servers-with-Windows-Server-2019-up- and-Running-in/ba-p/7066128#.XnxeVG5RWQ4
NEW QUESTION 16
Refer to the exhibits.
A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)
- A. 12 LFF drives
- B. 24 LFF drives
- C. 12 SFF drives
- D. 48 SFF drives
- E. 24 SFF drives
Answer: A,B
NEW QUESTION 17
Match each characteristic to the correct storage type.
Answer:
Explanation:
Explanation
Reference:
https://www.excitingip.com/1358/jbod-just-a-bunch-of-disks/
https://www.enterprisestorageforum.com/storage-networking/nas-vs.-san-differences-and-use-cases.html
NEW QUESTION 18
Match each HPE solution to its corresponding technology usage.
Answer:
Explanation:
Explanation
NEW QUESTION 19
Match each workload profile description with the corresponding profile. (Select all that apply.)
Answer:
Explanation:
NEW QUESTION 20
An administrator is using 4k block sizes on an iSCSI array. The administrator wants to optimize that packet size to decrease the header overhead in the IP traffic flow.
What feature should be enabled on the entire Layer 2 domain?
- A. Jumbo Frames
- B. Intelligent Resilient Framework (IRF)
- C. Data Center Bridging
- D. RDMA over converged Ethernet
Answer: A
NEW QUESTION 21
Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?
- A. Primera
- B. dHCI
- C. Nimble
- D. SimpliVity
Answer: D
NEW QUESTION 22
Read the question, and then refer to the exhibit.
display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten- GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing:
10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec
67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts,
0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC,
0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1.
They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?
- A. The interface link-speed and duplex are unknown.
- B. The interface is administratively down.
- C. The interface is configured for a PVID of VLAN 1.
- D. The interface loopback is not set.
Answer: C
Explanation:
Explanation/Reference: https://assets.ext.hpe.com/is/content/hpedam/a00004216enw
NEW QUESTION 23
You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.
Which action must be performed to finish the installation?
- A. Give the two SFF drives to the customer to keep on-site in case of future drive failure.
- B. Order the optional 2-SFF rear drive box to house the two SFF drives
- C. Order the optional Premium 6 SAS/SATA+2 NVMe cage to house the two SFF drives.
- D. install the two SFF drives in the two included SFF slots in the universal Media Bay.
Answer: D
NEW QUESTION 24
A customer needs a Layer 2 switch that provides basic switch functionality without the need to use a CLI or a GUI. Which type of switch meets the customer's needs?
- A. unmanaged
- B. managed
- C. smart web-managed
- D. cloud-managed
Answer: A
NEW QUESTION 25
A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple centralized management capability and deep buffer support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer's needs?
- A. Arista
- B. Altoline
- C. Aruba
- D. FlexFabric
Answer: D
NEW QUESTION 26
A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?
- A. jitter smoothing
- B. core boosting
- C. agentless management
- D. workload profile matching
Answer: B
NEW QUESTION 27
A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?
- A. NPAR
- B. FCoE
- C. RoCE
- D. RDMA
Answer: A
Explanation:
Reference:
https://h20195.www2.hpe.com/V2/getpdf.aspx/c04312719.pdf?ver=12
NEW QUESTION 28
Refer to the exhibit.
A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)
- A. HPE StoreOnce Gen4 16Gb Fibre Channel Network Card
- B. HPE D3710 Storage Enclosure
- C. HPE StoreOnce 3620 24TB Capacity Upgrade Kit
- D. HPE StoreOnce Gen4 10/25Gb SFP Network card
- E. HPE StoreOnce Cloud Bank Storage
Answer: C,D
Explanation:
Reference: https://www.hpe.com/uk/en/product-catalog/storage/disk-based-backup-systems/ pip.specifications.hpe-storeonce-systems.1011014655.html
NEW QUESTION 29
You need to change BIOS configuration settings without rebooting a server.
Which system utility should you use?
- A. Intelligent Management Center
- B. smart Storage Administrator
- C. intelligent Provisioning
- D. Lights-Out Online Configuration utility
Answer: C
NEW QUESTION 30
......
HP Exam Practice Test To Gain Brilliante Result: https://www.examdumpsvce.com/HPE0-V14-valid-exam-dumps.html
