Get Special Discount Offer on 220-1001 Dumps PDF [UPDATED Oct-2023]
PDF Download CompTIA Test To Gain Brilliante Result!
NEW QUESTION # 50
A technician is repairing a laser primer because its print jobs have a narrow, faded line running along the length of the page from top to bottom. The faded line is always in the same place Which of the following will MOST likely resolve the issue?
- A. Replace the transfer drum
- B. Replace the corona wire.
- C. Empty the excess toner bottle
- D. Update the printer firmware
Answer: B
NEW QUESTION # 51
A company is terminating Cat 6 wiring at a 110 block.
Which of the following should be used?
- A. A crimper
- B. A punchdown tool
- C. A cable stripper
- D. A tone generator
Answer: B
NEW QUESTION # 52
Some users are unable to access the Internet form their workstations. A technician runs the ipconfig command on one of the workstations and sees the following:
The technician pings 8.8.8.8 and gets no response. Next, the technician pings 192.168.1.1 and gets no response. The technician is able to successfully ping an adjacent workstation but cannot ping the print server on the floor below. Which of the following is the MOST likely cause of the Internet connectivity issue in the office?
- A. The users are not getting correct IP addresses from the DHCP server
- B. There is a problem with a router in the office
- C. There is a problem with a DNS server in the office
- D. The wireless access point in the area is down
Answer: B
NEW QUESTION # 53
A technician needs to install an IP-based camera in a remote location. The technician runs a Cat 6 cable to the location and connects it to the camer a. Which of the following is needed for the camera to operate?
- A. PoE switch
- B. USB to Ethernet adapter
- C. H.261 codec
- D. DVI cable
Answer: A
NEW QUESTION # 54
A technician installed a new scanner and imaging camera on a desktop to upload high-resolution images into an electronic health records application. This application is an example of:
- A. a secure client.
- B. a virtual client.
- C. an on-demand client.
- D. a thick client.
Answer: B
NEW QUESTION # 55
A technician is setting up a VM for use in testing software deployments. The VM is offline, but the hypervisor is not.
Which of the following settings should the technician change to resolve this issue?
- A. Virtual storage
- B. Virtual switch
- C. Virtual CPU
- D. Virtual RAM
- E. Virtual security
Answer: C
NEW QUESTION # 56
Drag each mobile technology to the description of its use. Some answers will not be used.
Answer:
Explanation:
Explanation
1 - IR
2 - Bluetooth
3 - NFC
4 - Tethering
NEW QUESTION # 57
Joe a technician is dispatched to troubleshoot a server that will not boot. The server console states no boot device can be found Joe reboots the server with the same result. He then attempts to repair the master boot record and boot sector with no results. Joe realizes the server is set up in a RAID 0 configuration and is certain there is a bad hard drive. Which of the following should Joe do to get the server to boot right away?
- A. Replace the faulty hard drive and restore from server data from backup
- B. Break the mirror and set the good hard drive as the default boot drive
- C. Unplug the defective hard-drive cable and reboot the server
- D. Change the RAID controller configuration from RAID 0 to RAID 5.
Answer: A
NEW QUESTION # 58
A user from a remote office is trying to connect lo the wireless network at the corporate headquarters but is unable to find It. After calling the help desk, the user receives the following credentials to connect to the network:
The user enters the credentials as given but is still unable to connect to the wireless network. Which of the following should the user try FIRST to connect to the network?
- A. Check for the proper credentials.
- B. Check If another device can see the network.
- C. Install a new wireless card.
- D. Enter the SSID of the network manually.
Answer: A
NEW QUESTION # 59
A developer reposts a recurring computer issue while compiling a program. The computer works........... not resolve the issue. Which of the following procedures will MOST likely solve the problem?
- A. Decrease the number of memory modules.
- B. Update the BIOS firmware.
- C. Reseat the video card.
- D. Reapply thermal paste
Answer: D
NEW QUESTION # 60
Which of the following would MOST likely be used to obtain electronic images of a large number of printed documents?
- A. ADF/flatbed scanner
- B. Camera/webcam
- C. QR scanner
- D. NFC device
Answer: A
NEW QUESTION # 61
A technician troubleshoots and fixes an issue. The technician then verifies the system is functional Which of the following is the NEXT step the technician should take?
- A. Establish a plan of action.
- B. Question the user for more information
- C. Document the findings
- D. Establish a theory of probable cause
Answer: D
NEW QUESTION # 62
A technician is upgrading the graphics card on an SFF PC. Which of the following is MOST important when considering the type of card to be installed?
- A. The size of the card
- B. The card's driver compatibility
- C. The cooling solution on the card
- D. The GDDR of the card
Answer: A
NEW QUESTION # 63
A user's workstation no longer boots A technician arrives and confirms the workstation will not boot, and while troubleshooting notices a burning smell coming from the chassis of the workstation The technician replaces the power cable and tries to boot again, but the smell returns and the machine does not boot Which of the following components MOST likely needs to be replaced?
- A. Hard drive
- B. Heat sink
- C. PSU
- D. UPS
- E. RAM
Answer: C
NEW QUESTION # 64
An administrator is configuring a virtualization workstation that will host several mission-critical VMs for the human resources department The workstation will be required to support multiple users at once, and large amounts of data will be accessed daily Which of the following components will BEST meet these requirements? (Select THREE).
- A. High-end GPU
- B. Additional RAM
- C. Quad-core CPU
- D. RAID 6 array
- E. Solid-state drives
- F. RAID 0 array
- G. Redundant PSUs
Answer: B,C,D
NEW QUESTION # 65
The network administrator has changed the IP address of ComputerA from 192.168.1.20 to 10.10.10.20 and now Jane, a user, is unable to connect to file shares on ComputerA from ComputerB using the computer name.
INSTRUCTIONS
Using the available tools, resolve the connectivity issues.
After troubleshooting the issue, verify a successful connection.
If at any time you would like to bring back the initial state of the simulation? please click the Reset All button.
Answer:
Explanation:
See explanation below
Explanation
Need to flush the DNS cache on Computer B:
Type in ipconfig/flushdns
NEW QUESTION # 66
A workstation has RAID 1 and RAID 5 arrays. Although performance is not degraded, management software is reporting a hard disk failure.
Which of the following should a technician do NEXT?
- A. Check one of the RAID 5 disks for failure
- B. Rebuild the RAID 1 disks for failure
- C. Check one of the RAID 1 disks for failure
- D. Rebuild the RAID 5 array
Answer: A
NEW QUESTION # 67
A virtual environment in which an application uses memory and a processor from a provider based on a leased rate that depends on the amount of resources used per month is referred to as:
- A. resource pooling.
- B. metered service.
- C. SaaS.
- D. virtual application streaming service.
Answer: C
NEW QUESTION # 68
A technician is upgrading the RAM in a server-grade laptop for a company's Chief Execute Officer (CEO).
The CEO cannot afford any downtime. Which of the following is the BEST type of memory module to purchase?
- A. Dual channel
- B. Parity
- C. DDR4
- D. LRSIMM
Answer: C
NEW QUESTION # 69
A technician replaced a broken LED screen on a mobile computer. The operating system can be seen perfectly on screen, but the touch screen is non-responsive. Which of the following are the MOST probable root causes for the given failure? (Choose three.)
- A. The touch screen must be calibrated after a replacement.
- B. The grounding screws are not securely attached.
- C. The digitizer cable is not seated properly on the motherboard.
- D. The LCD panel firmware must be updated.
- E. The replacement part is dead-on-arrival.
- F. The new touch-screen drivers must be installed.
- G. The hardware replacement used is a non-touch-screen.
Answer: C,F,G
NEW QUESTION # 70
Which of the following would enable an IP address to be translated Into common language format?
- A. DNS
- B. NAT
- C. MAPI
- D. APIPA
Answer: B
NEW QUESTION # 71
......
220-1001 Dumps are Available for Instant Access: https://www.examdumpsvce.com/220-1001-valid-exam-dumps.html
Provide Updated CompTIA 220-1001 Dumps as Practice Test and PDF: https://drive.google.com/open?id=1WdiZJ6IZqqyNKj9NwQRrqrlvaQ2pIWQF
