Tested Material Used To 350-401 Test Engine Exam Questions in here [Dec-2025]
Penetration testers simulate 350-401 exam PDF
Cisco 350-401 Exam covers a wide range of topics, including network architecture, virtualization, infrastructure, security, automation, and network assurance. Candidates are required to have a good understanding of these topics and must be able to apply their knowledge to solve real-world problems. 350-401 exam consists of multiple-choice questions and simulation-based questions, which test the candidates' ability to configure and troubleshoot network devices. To pass the exam, candidates must score at least 825 out of the total of 1000 points.
NEW QUESTION # 130
Drag and drop the code snippets from the bottom onto the blanks in the code to construct a request that configures a deny rule on an access list?
Answer:
Explanation:
Explanation:
NEW QUESTION # 131
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
NEW QUESTION # 132
Simulation 10
Refer to the exhibit.
Answer:
Explanation:
NEW QUESTION # 133
Refer to the exhibit.
A GRE tunnel has been created between HO and BR routers.
What is the tunnel IP on the HQ router?
- A. 209.165.202.130
- B. 10.111.111.1
- C. 209.165.202.134
- D. 10.111.111.2
Answer: B
NEW QUESTION # 134
Refer to the Exhibit.
Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used
Answer:
Explanation:
NEW QUESTION # 135
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
Answer:
Explanation:
.
NEW QUESTION # 136
Refer to the exhibit. Which statement about this IP SLA is true?
- A. The SLA has a timeout of 3.6 seconds.
- B. The SLA must also have a schedule configured before it will start.
- C. The SLA has a lifetime of 5 seconds.
- D. The TTL of the SLA packets is 10.
Answer: B
NEW QUESTION # 137 
Refer to the exhibit. Which configuration change will force BR2 to reach 209 165 201 0/27 via BR1?
- A. Set the MED to 1 on PE2 toward BR2 outbound.
- B. Set the weight attribute to 65.535 on BR1 toward PE1.
- C. Set the origin to igp on BR2 toward PE2 inbound.
- D. Set the local preference to 150 on PE1 toward BR1 outbound
Answer: A
Explanation:
Explanation
Diagrama Descripcion generada automaticamenteMED Attribute:+ Optional nontransitive attribute (nontransitive means that we can only advertise MED to routers that are one AS away)+ Sent through ASes to external BGP neighbors+ Lower value is preferred (it can be considered the external metric of a route)+
Default value is 0
NEW QUESTION # 138 
Refer to the exhibit. An engineer configures HSRP and enters the show standby command. Which two facts about the network environment are derived from the output? (Choose two.)
- A. The hello and hold timers are set to custom values.
- B. The virtual IP address of the HSRP group is 10.1.1.1.
- C. The local device has a higher priority selling than the active router
- D. If the local device fails to receive a hello from the active router for more than 5 seconds, it becomes the active router.
- E. If a router with a higher IP address and same HSRP priority as the active router becomes available, that router becomes the new active router 5 seconds later.
Answer: B,E
NEW QUESTION # 139
What Is a characteristic of a WLC that is in master controller mode?
- A. Configuration on the master controller is executed on all wireless LAN controllers.
- B. All new APs that join the WLAN are assigned to the master controller.
- C. The master controller is responsible for load balancing all connecting clients to other controllers
- D. All wireless LAN controllers are managed by the master controller.
Answer: B
Explanation:
Explanation
When should I use the master controller mode on a WLC? - When there is a master controller enabled, all newly added access points with no primary, secondary, or tertiary controllers assigned associate with the master controller on the same subnet.
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69561-wlc
NEW QUESTION # 140
A customer has a pair of Cisco 5520 WLCs set up in an SSO cluster to manage all APs. Guest traffic is anchored to a Cisco 3504 WLC located in a DMZ. Which action is needed to ensure that the EolP tunnel remains in an UP state in the event of failover on the SSO cluster?
- A. Configure back-to-back connectivity on the RP ports.
- B. Use the same mobility domain on all WLCs.
- C. Enable default gateway reachability check.
- D. Use the mobility MAC when the mobility peer is configured.
Answer: C
NEW QUESTION # 141
Drag and drop the snippets onto the blanks within the code to create an EEM script that adds an entry to a locally stored text file with a timestamp when a configuration change is made. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 142 
Answer:
Explanation:
See the solution below in Explanation:
Explanation:
Solution:
Copy run start
Verification:
OR
NEW QUESTION # 143
Which Python snippet should be used to store the devices data structure in a JSON file?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 144
Refer to the exhibit.
An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required?
- A. Add the access-class keyword to the aaa authentication command
- B. Add the autocommand keyword to the aaa authentication command
- C. Add the autocommand keyword to the username command
- D. Add the access-class keyword to the username command
Answer: C
Explanation:
The autocommand causes the specified command to be issued automatically after the user logs in. When the command is complete, the session is terminated. Because the command can be any length and can contain embedded spaces, commands using the autocommand keyword must be the last option on the line. In this specific question, we have to enter this line username CCNP autocommand show running-config.
NEW QUESTION # 145
Drag and drop the solutions that comprise Cisco Cyber Threat Defense from the left onto the objectives they accomplish on the right.
Answer:
Explanation:
NEW QUESTION # 146
Refer to the exhibit. A network administrator configured RSPAN to troubleshoot an issue between switch 1 and switch2. The switches are connected using interface GigabitEthernet 1/1. An external packet capture device is connected to swich2 interface GigabitEthernet 1/2. Which two commands must be added to complete this configuration? (Choose two.)
- A. switch2(config)# monitor session 1 source remote vlan 70
switch2(config)# monitor session 1
destination interface GigabitEthernet1/1 - B. switch2(config-if)# switchport trunk allowed vlan 10,20,30,40,50,60,70-80
- C. switch2(config)# monitor session 1 source remote vlan 70
switch2(config)# monitor session 1 destination interface GigabitEthernet1/2 - D. switch2(config)# monitor session 2 destination vlan 10
- E. switch1(config)# interface GigabitEthernet 1/1
switch1(config-if)# switchport mode access
switch1(config-if)# switchport access vlan 10
switch2(config)# interface GigabitEthernet 1/1
switch2(config-if)# switchport mode access
switch2(config-if)# switchport access vlan 10
Answer: B,C
Explanation:
Switch2 is not allowing VLAN 70 which is used on Switch1 for RSPAN
So we must allow it -> Option B is correct (although it would not allow VLAN 81 to 90 to go through).
"An external packet capture device is connected to switch2 interface GigabitEthernet1/2" so we must configure Gi1/2 as the destination port.
For your information, this is how to configure Remote SPAN (RSPAN) feature on two switches.
Traffic on FastEthernet0/1 of Switch 1 will be sent to Fa0/10 of Switch2 via VLAN 40.
+ Configure on both switches
Switch1,2(config)#vlan 40
Switch1,2(config-vlan)#remote-span
+ Configure on Switch1
Switch1(config)# monitor session 1 source interface FastEthernet 0/1
Switch1(config)# monitor session 1 destination remote vlan 40
+ Configure on Switch2
Switch2(config)#monitor session 5 source remote vlan 40
Switch2(config)# monitor session 5 destination interface FastEthernet 0/10
NEW QUESTION # 147
Which description of an SD-Access wireless network infrastructure deployment is true?
- A. The access point is part of the fabric underlay.
- B. The access point is part the fabirc overlay.
- C. The WLC is part of the fabric underaly.
- D. The wireless client is part of the fabirc overlay.
Answer: B
NEW QUESTION # 148
......
Cisco 350-401 certification exam, also known as Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR), is a comprehensive exam that tests the knowledge and skills required to implement and troubleshoot enterprise network infrastructure. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is designed for network engineers, network administrators, and network architects who want to upgrade their skills and knowledge in enterprise networking. 350-401 exam covers a wide range of topics, including network security, automation, virtualization, and network design.
Authentic Best resources for 350-401 Online Practice Exam: https://www.examdumpsvce.com/350-401-valid-exam-dumps.html
Get the superior quality 350-401 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=11HJ6F_lRdVRsfyjwoZLF1XtDSZHKfmGM
