Free NSE6_FWF-6.4 Exam Files Downloaded Instantly UPDATED [2024]
100% Pass Guaranteed Free NSE6_FWF-6.4 Exam Dumps
NEW QUESTION # 10
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: B,D
Explanation:
To enable rogue AP scanning
NEW QUESTION # 11
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. Wireless network security must be set to open
- C. SQL services must be running
- D. DTLS encryption on wireless traffic must be turned off
Answer: A
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION # 12
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
Answer: A,B
Explanation:
Explanation
According to the web search results, Auto TX Power control is a feature that allows the AP to automatically adjust its transmission power based on the RF environment. The goal is to minimize interference and optimize coverage cells for roaming. When the AP detects any other wireless signal stronger than -70 dBm, it means that there is a potential source of interference nearby, so it will reduce its transmission power until it reaches the minimum configured TX power limit. This will reduce the interference and improve coexistence with other devices. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it means that there is a high density of APs in the area, so it will also reduce its transmission power until it reaches the minimum configured TX power limit. This will balance the load and avoid overlapping coverage areas.
References: AP Transmit Power and Enable Power Reduction with Auto TX, Transmit Power and Antenna Configuration, Meraki Auto RF: Wi-Fi Channel and Power Management
NEW QUESTION # 13
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA3 Enterprise
- B. WPA2 Enterprise
- C. Open, with radius MAC filtering
- D. WPA2 Personal and radius MAC filtering
Answer: D
NEW QUESTION # 14
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Disable intra-vap-privacy for the Authors vap-wireless network
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Increase the transmission power of the AP radio interfaces
- D. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
Answer: B,D
Explanation:
Explanation
The configuration changes that will resolve the issue are to configure set vaps to be "Authors" for both interfaces in the wtp-profile, and to configure vap-all to be manual for both interfaces in the wtp-profile. This is because the current configuration does not assign any VAPs to the AP interfaces, which means that no wireless networks are broadcasted by the APs. The vap-all setting determines whether all VAPs are assigned to an interface or not, and the vaps setting specifies which VAPs are assigned to an interface. By setting vap-all to manual and vaps to "Authors", the APs will only broadcast the Authors wireless network on both interfaces. Disabling intra-vap-privacy for the Authors vap-wireless network will not help, as it only affects the communication between clients on the same SSID, not their connection to the AP. Increasing the transmission power of the AP radio interfaces will not help, as it only affects the signal strength and coverage of the APs, not their broadcasting of wireless networks. References: wireless-controller vap | FortiGate / FortiOS 6.4.0, Technical Note: How to configure intra-SSID privacy
NEW QUESTION # 15
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Data channels
- B. Control channels
- C. Security channels
- D. FortLink channels
Answer: A,B
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION # 16
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag -d sta command
- B. On the controller CLI, using the WiFi Client monitor
- C. On the AP CLI, using the cw_diag ksta command
- D. On the controller CLI, using the diag wireless-controller wlac -d sta command
Answer: D
NEW QUESTION # 17
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag -d sta command
- C. On the AP CLI, using the cw_diag ksta command
- D. On the controller CLI, using the WiFi Client monitor
Answer: C
NEW QUESTION # 18
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Broadcast
- C. DHCP
- D. Multicast
Answer: A
NEW QUESTION # 19
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Hardware selection phase
- C. Project information phase
- D. Site survey phase
Answer: C,D
NEW QUESTION # 20
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles can only be applied via firewall policies on the FortiGate.
- B. Security profiles can only be applied to unencrypted wireless traffic.
- C. Security profiles are only supported on Bridge-mode SSIDs.
- D. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
Answer: D
Explanation:
Explanation
Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. References: Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.
NEW QUESTION # 21
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The wireless network to Internet firewall policy must be configured
- C. The wireless network interface must be assigned a Layer 3 address
- D. The new network must be manually assigned to a FortiAP profile.
Answer: B
Explanation:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION # 22
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiGate
- B. FortiAP Cloud
- C. AP Manager
- D. FortiSwitch
Answer: A,B
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 23
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
Answer: A,C
NEW QUESTION # 24
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Hardware selection phase
- C. Project information phase
- D. Site survey phase
Answer: C,D
Explanation:
Explanation
According to the web search results, the project information phase and the site survey phase are part of the process to plan a wireless design project. The project information phase involves defining the project scope, objectives, requirements, deliverables, and stakeholders. It also includes creating a project plan, a risk management plan, a communication plan, and a budget.1 The site survey phase involves conducting a physical inspection of the site where the wireless network will be deployed, measuring the signal strength and interference levels, identifying the optimal locations for the access points and antennas, and validating the network performance and coverage.2 The hardware selection phase and the installation phase are not part of the planning process, but rather part of the implementation process. The hardware selection phase involves choosing the appropriate wireless devices, such as access points, routers, switches, controllers, and cables, based on the network design and specifications.3 The installation phase involves installing, configuring, testing, and documenting the wireless network components according to the project plan and best practices.3 References: Wireless Device Network Planning and Design - Emerson, Telecommunications and Implementation Project Management - BICSI, Project Planning | Wireless Design Services | Digi International
NEW QUESTION # 25
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Install another AP in the reception area to improve available bandwidth
- D. Increase the transmission power of the AP radios
Answer: A
NEW QUESTION # 26
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. SQL services must be running
- C. Wireless network security must be set to open
- D. DTLS encryption on wireless traffic must be turned off
Answer: B
Explanation:
Explanation
https://docs.fortinet.com/document/fortipresence-vm/1.2.0/administration-guide/546812/introduction
NEW QUESTION # 27
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: B
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 28
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 81 Tunnel-Private-Group-ID
- B. 83 Tunnel-Preference
- C. 64 Tunnel-Type
- D. 58 Egress-VLAN-Name
- E. 65 Tunnel-Medium-Type
Answer: A,C,E
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 29
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. An X.509 to authenticate the authentication server
- B. A WPA2 or WPA3 personal wireless network
- C. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- D. An X.509 certificate to authenticate the client
- E. A WPA2 or WPA3 Enterprise wireless network
Answer: A,D
NEW QUESTION # 30
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Install another AP in the reception area to improve available bandwidth
- D. Increase the transmission power of the AP radios
Answer: A
NEW QUESTION # 31
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: A,B
NEW QUESTION # 32
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- B. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: A
NEW QUESTION # 33
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that cannot be used because of regulatory channel restrictions
- B. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- C. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- D. Indicates channels that can be used only when Radio Resource Provisioning is enabled
Answer: B
Explanation:
Explanation
This frequencies are also used by other licensed applications, wireless LANs have to use a specific method to gain access to certain higher frequencies and this method is known as DFS.
NEW QUESTION # 34
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP measurements can be scheduled to occur at specific times.
Answer: A,C
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION # 35
......
Latest NSE6_FWF-6.4 dumps - Instant Download PDF: https://www.examdumpsvce.com/NSE6_FWF-6.4-valid-exam-dumps.html
Verified & Latest NSE6_FWF-6.4 Dump Q&As with Correct Answers: https://drive.google.com/open?id=1VN-31jgRYgu8lBYxabh8z9lhQ7HJbE81
