[Oct-2021] Valid Way To Pass Citrix Exam Dumps with 1Y0-241 Exam Study Guide
All 1Y0-241 Dumps and Deploy and Manage Citrix ADC 13 with Traffic Management Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 18
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC SDX
- C. Citrix ADC MPX
- D. Citrix ADC VPX
Answer: A
Explanation:
Explanation/Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html
NEW QUESTION 19
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Bind the domain to the CS vServer instead of the GSLB vServer.
- B. Configure CS policies that designate a load-balancing vServer as the target vServer.
- C. Configure a CS vServer of target type GSLB.
- D. Bind the GSLB domain to the GSLB vServer.
Answer: B,C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/how-to/ configure-gslb-content-switch.html
NEW QUESTION 20
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
Answer: D
NEW QUESTION 21
A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)
- A. Unbind the default SSL profile and bind the newly created SSL profile.
- B. Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.
- C. Globally unbind the ns_default_ssl_profile_frontend SSL.
- D. Globally disable the ns_default_ssl_profile_frontend SSL profile.
- E. Create a separate SSL profile.
Answer: A,D
NEW QUESTION 22
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on HA monitoring on all interfaces
- B. Turn on fail-safe mode.
- C. Configure SyncVlan
- D. Turn on Independent Network Configuration (INC) mode.
Answer: D
NEW QUESTION 23
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Use the reset button on the front of the appliance.
- B. Connect to a USB port to issue a restart command.
- C. Turn off the appliance using the power button.
- D. Use the NMI button on the back of the appliance.
Answer: D
NEW QUESTION 24
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP on port 99
- B. HTTP on port 80
- C. HTTP_ECV on port 99
- D. HTTP-ECV on port 80
Answer: C
NEW QUESTION 25
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL bridge protocol for the vServer
- B. SSL bridge protocol for the services
- C. SSL protocol for the vServer
- D. SSL protocol for the services
- E. HTTP protocol for the vServer
- F. HTTP protocol for the services
Answer: C,D
NEW QUESTION 26
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?
- A. Enable the content switching feature.
- B. Bind a certificate.
- C. Bind the default load-balancing vServer.
- D. Disable the spillover redirect URL.
Answer: C
NEW QUESTION 27
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?
- A. Sysadmin
- B. Network
- C. Superuser
- D. Operator
Answer: A
NEW QUESTION 28
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC SDX
- C. Citrix ADC MPX
- D. Citrix ADC VPX
Answer: A
NEW QUESTION 29
Which step can a Citrix Administrator take to use default compression policies?
- A. Disable the Citrix ADC compression feature at a global level.
- B. Select the compression algorithm (gzip/deflate/identity).
- C. Bind the default compression policies to the vServer.
- D. Enable compression on the associated bound services.
Answer: B
NEW QUESTION 30
How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0 in every request?
- A. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT - B. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - C. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - D. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT
Answer: B
NEW QUESTION 31
Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy to allow users access through the Citrix ADC. The administrator bound the policy to a specific vServer.
Which policy expression will allow all users access through the vServer?
- A. false
- B. ns_true
- C. ns_false
- D. true
Answer: D
NEW QUESTION 32
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The synchronization on the secondary appliance is disabled.
- B. TCP port 22 is disabled between the primary and secondary ADCs.
- C. The administrator made both Citrix ADCs primary.
- D. The remote procedure call (RPC) nodes are incorrectly configured.
Answer: D
NEW QUESTION 33
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
"DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Request originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host.example.net" will be redirected to "host1.example.com".
- C. Request originated from "host1.example.net" will be redirected to "host.example.com".
- D. Response originated from "host1.example.net" will be redirected to "host.example.com".
Answer: C
NEW QUESTION 34
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Address (A) record
- B. Pointer Record (PTR)
- C. Canonical Name (CNAME)
- D. Name Server (NS) record
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/dns/configure-citrix-adc-adns-server.html
NEW QUESTION 35
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Request originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host.example.net" will be redirected to "host1.example.com".
- C. Request originated from "host1.example.net" will be redirected to "host.example.com".
- D. Response originated from "host1.example.net" will be redirected to "host.example.com".
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 36
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/load- balancing.html
NEW QUESTION 37
......
Real Exam Questions & Answers - Citrix 1Y0-241 Dump is Ready: https://drive.google.com/open?id=1ycrJW5-SgygIRwJBvD-rgpmappzROtvG
Get Latest [Oct-2021] Conduct effective penetration tests using ExamDumpsVCE 1Y0-241
