NSE7_LED-7.0 Exam Questions Get Updated [2024] with Correct Answers
Practice NSE7_LED-7.0 Questions With Certification guide Q&A from Training Expert ExamDumpsVCE
The NSE7_LED-7.0 exam covers a wide range of topics, including Fortinet Secure SD-WAN, Fortinet Security Fabric, FortiGate firewalls, FortiAnalyzer, and FortiManager. Candidates will be tested on their ability to design, implement, and troubleshoot these solutions in LAN edge environments. They will also need to demonstrate their knowledge of network security concepts, such as VPNs, SSL inspection, IPSec, and NAT.
Fortinet NSE7_LED-7.0 certification exam consists of multiple-choice questions and requires the candidates to have a deep understanding of the Fortinet Security Fabric and its implementation in a LAN Edge environment. NSE7_LED-7.0 exam is a challenging one, and the candidates need to have hands-on experience with the Fortinet Security Fabric to pass the exam.
NEW QUESTION # 21
Refer to the exhibit. Examine the debug output shown in the exhibit.
Which two statements about the RADIUS debug output are true? (Choose two)
- A. The user student belongs to the SSLVPN group
- B. User authentication succeeded using MSCHAP
- C. User authentication failed
- D. The RADIUS server sent a vendor-specific attribute in the RADIUS response
Answer: A,D
NEW QUESTION # 22
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power"?
- A. Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength
- B. Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client
- C. Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm
- D. Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm
Answer: C
Explanation:
Explanation
According to the FortiAP Configuration Guide1, "Auto TX power control allows the AP to adjust its transmit power based on the signal strength of the client. The AP will measure the signal strength of the client every 30 seconds and adjust its transmit power up or down until the client signal is detected at -70 dBm." Therefore, option A is true because it describes how the FortiAP wireless interface configures its transmission power when auto TX power control is enabled. Option B is false because FortiGate does not measure the signal strength of adjacent AP interfaces, but rather the FortiAP does. Option C is false because FortiGate does not adjust the adjacent AP power, but rather the FortiAP adjusts its own power. Option D is false becauseFortiGate does not measure the signal strength of the weakest associated client, but rather the FortiAP does.
NEW QUESTION # 23
Refer to the exhibit.
Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)
- A. In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)
- B. Import the CA that signed the user certificate
- C. Enable XAUTH on the IPsec VPN tunnel
- D. In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN
- E. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate
Answer: B,C,D
Explanation:
Explanation
According to the FortiGate Administration Guide, "To use certificate-based authentication, you must configure the following settings on both peers: Select Signature as the authentication method and select a certificate to use for authentication. Import the CA certificate that issued the peer's certificate. Enable XAUTH on the phase 1 configuration." Therefore, options B, D, and E are true because they describe the configuration changes that must be made on FortiGate to perform certificate-based authentication for the IPsec VPN user.
Option A is false because creating a PKI user for the IPsec VPN user is not required, as the user certificate can be verified by the CA certificate. Option C is false because changing the IKE mode to Main (ID protection) is not required, as the IKE mode can be either Main or Aggressive for certificate-based authentication.
NEW QUESTION # 24
Which FortiSwitch VLANs are automatically created on FortiGate when the first FortiSwitch device is discovered?
- A. fortilink. quarantine erspan voice video and onboarding
- B. default quarantine rspan voice video and nac_segment
- C. access, quarantine, rspan. voice, video, and onboarding
- D. default quarantine, rspan voice video onboarding and nac_segment
Answer: D
Explanation:
NEW QUESTION # 25 
Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser
Which two settings are the likely causes of the issue? (Choose two.)
- A. The user address is not in DDNS form
- B. The wireless user's browser is missing a CA certificate
- C. The external server FQDN is incorrect
- D. The FortiGate authentication interface address is using HTTPS
Answer: B,C
Explanation:
Explanation
According to the exhibit, the wireless guest users are getting a certificate error while loading the captive portal login page. This means that the browser cannot verify the identity of the server that is hosting the login page.
Therefore, option A is true because the external server FQDN is incorrect, which means that it does not match the common name or subject alternative name of the server certificate. Option B is also true because the wireless user's browser is missing a CA certificate, which means that it does not have the root or intermediate certificate that issued the server certificate. Option C is false because the FortiGate authentication interface address is using HTTPS, which is a secure protocol that encrypts the communication between the browser and the server. Option D is false because the user address is not in DDNS form, which is not related to the certificate error.
NEW QUESTION # 26
Refer to the exhibit.
Examine the RADIUS server configuration shown in the exhibit
An administrator has configured a RADIUS server on FortiGate that points to FortiAuthenticator FortiAuthenticator is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP While testing the configuration the administrator noticed that the diagnosetest authserver command worked with PAP, however authentication requests failed when using MSCHAP2 Which two solutions can the administrator implement to get MSCHAP2 authentication to work'' (Choose two.)
- A. On FortiGate configure the NAS IP setting on the RADIUS
server - B. On FortiAuthenticator enable Windows Active Directory Domain Authentication to add FortiAuthenticator to the Windows domain
- C. On FortiAuthenticator change the back-end authentication server from LDAP to RADIUS
- D. On FortiGate update the Secret setting on the RADIUS server
Answer: B,C
Explanation:
Explanation
According to the exhibit, the RADIUS server configuration on FortiGate points to FortiAuthenticator, which is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP. However, LDAP does not support MSCHAP2 authentication, which is required for RADIUS. Therefore, option A is true because on FortiAuthenticator, enabling Windows Active Directory Domain Authentication will add FortiAuthenticator to the Windows domain and allow it to use MSCHAP2 authentication with the AD server. Option C is also true because on FortiAuthenticator, changing the back-end authentication server from LDAP to RADIUS will allow it to use MSCHAP2 authentication with the AD server. Option B is false because on FortiGate, configuring the NAS IP setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the source IP address of the RADIUS packets. Option D is false because on FortiGate, updating the Secret setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the shared secret between FortiGate and FortiAuthenticator.
NEW QUESTION # 27
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)
- A. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
- B. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios
- C. Verify that the broadcast SSID option is enabled in the SSID configuration
- D. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
Answer: C,D
Explanation:
Explanation
According to the FortiAP Configuration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. You must also enable Broadcast SSID." Therefore, option A is true because the broadcast SSID option allows the SSID to be visible to wireless clients.
Option C is also true because the SSID must be applied to an AP group that contains the APs that should be broadcasting the SSID. According to the same guide1, "You can create AP groups and assign them to different locations or departments. You can then apply different settings, such as SSIDs, to each group." Option B is false because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to broadcasting the SSID. Option D is false because the SSID can be applied to an AP group or a global profile, which will automatically apply to all APs, without manually configuring each AP profile.
NEW QUESTION # 28
Which EAP method requires the use of a digital certificate on both the server end and the client end?
- A. EAP-TTLS
- B. PEAP
- C. EAP-GTC
- D. EAP-TLS
Answer: D
Explanation:
EAP-TLS is the most secure EAP method. It requires a digital certificate on both the server end and the client end. The server and client authenticate each other using their certificates.
NEW QUESTION # 29
Refer to the exhibit. Examine the IPsec VPN phase 1 configuration shown in the exhibit. An administrator wants to use certificate-based authentication for an IPsec VPN user.
Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)
- A. In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)
- B. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate
- C. Import the CA that signed the user certificate
- D. In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN
- E. Enable XAUTH on the IPsec VPN tunnel
Answer: B,C,D
NEW QUESTION # 30
Which CLI command should an administrator use to view the certificate verification process in real time?
- A. diagnose debug application fnbamd -1
- B. diagnose debug application authd -1
- C. diagnose debug application foauthd -1
- D. diagnose debug application radiusd -1
Answer: C
Explanation:
Explanation
According to the FortiOS CLI Reference Guide, "The diagnose debug application foauthd command enables debugging of certificate verification process in real time." Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.
NEW QUESTION # 31
Refer to the exhibit
A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)
- A. The device is not configured for 802 IX authentication.
- B. The device has been quarantined for 3600 seconds.
- C. The device does not support 802 1X authentication
- D. The device has been assigned the guest VLAN
Answer: A,C
Explanation:
Explanation
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.
NEW QUESTION # 32
Refer to the exhibit. Examine the LDAP server configuration shown in the exhibit. Note that the Username setting has been expanded to display its full content.
On the Windows AD server 10.0.1.10, the administrator used dsquery, which returned the following output:
>dsquery user -samid student
"CN=student,CN=Users,DC=trainingAD,DC=training,DC=lab"
According to the output, which FortiGate LDAP setting is configured incorrectly?
- A. Common Name Identifier
- B. Bind Type
- C. Distinguished Name
- D. Username
Answer: C
Explanation:
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to "dc=training,dc=lab". However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be
"dc=trainingAD,dc=training,dc=lab".
NEW QUESTION # 33
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range. You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?
- A. 85%
- B. 65%
- C. 95%
- D. 75%
Answer: D
Explanation:
NEW QUESTION # 34
Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?
- A. default quarantine rspan voice video and nac_segment
- B. access, quarantine, rspan. voice, video, and onboarding
- C. default quarantine, rspan voice video onboarding and nac_segment
- D. fortilink. quarantine erspan voice video and onboarding
Answer: D
Explanation:
Explanation
According to the FortiGate Administration Guide, "When you add a FortiSwitch device to the Security Fabric, FortiGate automatically creates the following VLANs on theFortiSwitch device: fortilink, quarantine, erspan, voice, video, and onboarding." Therefore, option D is true because it lists the FortiSwitch VLANs that are automatically created on FortiGate when the first FortiSwitch device is discovered. Option A is false because default and nac_segment are not among the automatically created VLANs. Option B is false because access and rspan are not among the automatically created VLANs. Option C is false because default and nac_segment are not among the automatically created VLANs.
NEW QUESTION # 35
Exhibit.
Exhibit.
Refer to the exhibits
In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it The network is a tunneled network however clients connecting to a wireless network require access to a local printer Clients are trying to print to a printer on the remote site but are unable to do so Which configuration change is required to allow clients connected to the Corporate SSID to print locally?
- A. Configure split-tunneling in the wtp-profile configuration
- B. Configure the printer as a wireless client on the Corporate wireless network
- C. Configure split-tunneling in the vap configuration
- D. Disable the Block Intra-SSID Traffic (intra-vap-privacy) setting on the SSID (VAP) profile
Answer: C
Explanation:
Explanation
According to the Fortinet documentation1, "Split tunneling allows you to specify which traffic is tunneled to the FortiGate and which traffic is sent directly to the Internet. This can improve performance and reduce bandwidth usage." Therefore, by configuring split-tunneling in the vap configuration, you can allow the clients connected to the Corporate SSID to access both the corporate network and the local printer. Option B is incorrect because split-tunneling is configured at the vap level, not the wtp-profile level. Option C is incorrect because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to accessing a local printer. Option D is unnecessary and impractical because the printer does not need to be a wireless client on the Corporate wireless network to be accessible by the clients.
NEW QUESTION # 36
Refer to the exhibit. In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it. The network is a tunneled network however clients connecting to a wireless network require access to a local printer. Clients are trying to print to a printer on the remote site but are unable to do so.
Which configuration change is required to allow clients connected to the Corporate SSID to print locally?
- A. Configure split-tunneling in the wtp-profile configuration
- B. Configure the printer as a wireless client on the Corporate wireless network
- C. Configure split-tunneling in the vap configuration
- D. Disable the Block Intra-SSID Traffic (intra-vap-privacy) setting on the SSID (VAP) profile
Answer: C
Explanation:
Split tunneling allows you to specify which traffic is tunneled to the FortiGate and which traffic is sent directly to the Internet. This can improve performance and reduce bandwidth usage.
Therefore, by configuring split-tunneling in the vap configuration, you can allow the clients connected to the Corporate SSID to access both the corporate network and the local printer.
NEW QUESTION # 37
Refer to the exhibit.
Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?
- A. All EAP messages will be terminated on FortiSwitch
- B. FortiSwitch will assign non-802 1X devices to the onboarding VLAN
- C. FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password
- D. FortiSwitch cannot authenticate multiple devices connected to the same port
Answer: B
Explanation:
Explanation
According to the FortiSwitch Administration Guide, "If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices." Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.
NEW QUESTION # 38
Refer to the exhibit showing a network topology and SSID settings. FortiGate is configured to use an external captive portal. However, wireless users are not able to see the captive portal login page.
Which configuration change should the administrator make to fix the problem?
- A. Enable NAT in the firewall policy with the ID 13.
- B. Add the FortiAuthenticator and WindowsAD address objects as exempt destinations services.
- C. Enable the captive-portal-exempt option in the firewall policy with the ID 12.
- D. Remove the guest.portal user group in the firewall policy with the ID 12.
Answer: B
Explanation:
According to the exhibit, the network topology and SSID settings show that FortiGate is configured to use an external captive portal hosted on FortiAuthenticator, which is connected to a Windows AD server for user authentication. However, wireless users are not able to see the captive portal login page, which means that they are not redirected to the external captive portal URL. Therefore, option B is true because adding the FortiAuthenticator and WindowsAD address objects as exempt destinations services will allow the wireless users to access the external captive portal URL without being blocked by the firewall policy.
NEW QUESTION # 39
......
Becoming certified in the Fortinet NSE 7 - LAN Edge 7.0 Exam can help IT professionals advance their careers and demonstrate their expertise in managing and securing LAN edge networks. Fortinet NSE 7 - LAN Edge 7.0 certification can also help organizations ensure that their network security professionals have the knowledge and skills necessary to protect their networks from advanced threats.
Prepare Top Fortinet NSE7_LED-7.0 Exam Audio Study Guide Practice Questions Edition: https://www.examdumpsvce.com/NSE7_LED-7.0-valid-exam-dumps.html
Free Fortinet NSE7_LED-7.0 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=1Tu2AoQRX3pdOGX9ysbdJWw-nHbSPZVyX
