[Jan-2022 Newly Released] ACMA-6.3 Dumps for Aruba Certification Certified
Updated Verified ACMA-6.3 dumps Q&As - 100% Pass
NEW QUESTION 33
The characteristics of 802.1X Authentication include (Select three):
- A. Port based authentication
- B. Support of RADIUS external authentication
- C. L3 Authentication
- D. EAP terminates on authenticator
- E. Extensible Authentication Protocol
Answer: A,B,E
NEW QUESTION 34
An Aruba AP 125 is capable of supporting which of the following network types? (Select three)
- A. 802.11w
- B. 802.11n
- C. 802.11a
- D. 802.11p
- E. 802.11b
Answer: B,C,E
NEW QUESTION 35
What does SET ORIENTATION option do in the Visual RF Plan edit tool?
- A. Set the horizontal plane on each floor
- B. Sets the proper vertical floor plan alignment
- C. Sets the North/South orientation of the building
- D. Allows the planner to set the directional antenna orientation
- E. Give the option to resize a floor
Answer: B
NEW QUESTION 36
When a barcode scanner connects to an AP, what is the 1st role that is assigned to it?
- A. 802.1X default role
- B. Initial role
- C. User derived Role
- D. MAC authentication default role
- E. Server derived role
Answer: B
NEW QUESTION 37
How many roles should be created on a controller?
- A. The same number as firewall policies
- B. The same number as SSIDs
- C. One less than the number of firewall policies
- D. One per authentication type
- E. As many as necessary
Answer: E
NEW QUESTION 38
Which of the following parameters is not needed by Visual RF Plan in order to Plan APs on a floor region?
- A. PHY Type
- B. AP Type
- C. Desired Data Rate
- D. Distance to Controller
- E. Environment
Answer: D
NEW QUESTION 39
Which of the following core components of ARM enables intelligent distribution of clients across available channel capacity?
- A. Band steering
- B. Spectrum load balancing
- C. Multi-band scan
- D. Rogue AP detection
- E. Coordinated Access to a Single Channel
Answer: B
NEW QUESTION 40
What is the purpose of the validuser ACL?
- A. The validuser ACL is used during 802.1X authentication to check that the client is in the layer 3 user-table
- B. Before a client is added to the controller's user table, the validuser ACL is checked to make sure the client has a valid IP address
- C. When an AP needs to transmit data to a user, it checks the validuser ACL to make sure the user has a valid IP address
- D. A list of configured MAC addresses that define the valid users
- E. When a user transmits data through the controller, the validuser ACL is used to check if the user is in the layer 3 user-table
Answer: B
NEW QUESTION 41
Aliases are used in firewall policies to:
- A. Ease readability and maintainability for source and destination addresses
- B. Apply firewall polices to ports in a stateful manner
- C. Make firewall rules act like traditional ACLs
- D. Are a part of roles, not the firewall
- E. Are applied as an action in a rule
Answer: A
NEW QUESTION 42
Which of the following would be appropriate for standalone MAC Authentication?
- A. Barcode scanner
- B. Internal User
- C. Admin user
- D. Laptops
- E. Guest User
Answer: A
NEW QUESTION 43
In what order does the AP dynamically discover the Master controller?
- A. DHCP option 43, DNS query, ADP Multicast, ADP Broadcast
- B. ADP Multicast, ADP Broadcast, DHCP option 43, DNS query
- C. DHCP option 43, ADP Multicast, ADP Broadcast, DNS query
- D. DHCP option 43, ADP Broadcast, ADP multicast, DNS Query
- E. DNS query, ADP Broadcast, ADP Multicast, DHCP option 43
Answer: C
NEW QUESTION 44
Which of these are supported by the Aruba Controller? (Select two)
- A. HSRP
- B. BGP
- C. SNMP
- D. Blowfish encryption
- E. AES Encryption
Answer: C,E
NEW QUESTION 45
A wired device is connected to an untrusted port on a controller. How can a role be assigned to the device?
- A. A default Role can be directly assigned to an untrusted port
- B. The Role assigned to the untrusted port
- C. An initial Role can be assigned directly to the VLAN
- D. Roles are assigned to devices connected to a trusted port
- E. Adding a wired AAA profile to a VLAN on the untrusted port
Answer: E
NEW QUESTION 46
In the startup wizard the ports configuration screen allows you to do the following (Select three)?
- A. Specify the IP address of the Vlan
- B. Configure port channels
- C. Identify trunk ports
- D. Identify the native VLAN for a port
- E. Assign VLANs
Answer: C,D,E
NEW QUESTION 47
Which of the following is true about configuring a server group?
- A. If multiple servers are assigned to the server group, all except the 1st will be ignored
- B. If the internal database is used in the server group, then no external servers can be added
- C. A server group can have more than 1 server
- D. All the servers in a server group will be used round robin style
- E. Server rules are used to send information to the configured servers
Answer: C
NEW QUESTION 48
What information is required by an AP in order to boot? (Select three)
- A. Establish an IPSEC tunnel with the Master controller
- B. AP's IP Address, Netmask, Default Gateway
- C. An established NTP connection to the Master Controller
- D. Aruba Controller's Master IP Address
- E. AP's Name and Group
Answer: B,D,E
NEW QUESTION 49
In a Campus AP deployment, an access point has been provisioned statically with an IP address, subnet mask, default gateway and Controller IP address. Control Plane Security has been disabled. Both the Controller and the Access Point are using 6.3 firmware. If a 3rd party firewall is placed in between the AP and controller, what traffic would need to be allowed for the AP to boot successfully and broadcast Wireless Networks? (Select two)
- A. GRE
- B. NTP
- C. DHCP
- D. PAPI
- E. SNMP
Answer: A,D
NEW QUESTION 50
WPA and WPA2 can use the following authentication methods: (Select two)
- A. Captive Portal
- B. WEP Keys
- C. IPSEC
- D. PSK
- E. 802.1X
Answer: D,E
NEW QUESTION 51
A port on a controller has been configured as untrusted. No wired access AAA profile or Global AAA profile is configured. When a user connects to that port which of the following statements is true?
- A. the user is denied all access automatically because no wired access AAA or Global AAA profile is assigned.
- B. The user will fall into the default wired access AAA profile and will be given the initial role.
- C. Since there is no wired access AAA profile or Global AAA profile the user will be given the logon role.
- D. When configuring the port as untrusted, an error message of "no wired access AAA profile exists" Therefore this is an invalid configuration.
- E. Since there is no wired access AAA profile, only port policies will be applied
Answer: C
NEW QUESTION 52
What is the IP address of the controller when using the startup wizard?
- A. 10.1.1.1
- B. 10.1.10.100
- C. 172.16.0.1
- D. 172.16.0.254
- E. 192.168.1.1
Answer: D
NEW QUESTION 53
A reboot of the controller is necessary in which of the following scenarios? (Select two)
- A. Changing controller IP
- B. Extending a license range
- C. Changing the VLAN of a Virtual AP Profile
- D. Changing of Controller Role
- E. Creating of a new AP Group
Answer: A,D
NEW QUESTION 54
......
Latest ACMA-6.3 Exam Dumps Aruba Exam from Training: https://www.examdumpsvce.com/ACMA-6.3-valid-exam-dumps.html
