[2022] Pass Cisco 300-610 Premium Files Test Engine pdf - Free Dumps Collection
New 2022 Realistic 300-610 Dumps Test Engine Exam Questions in here
Official Training for Cisco 300-610 Exam
Considering the above amount of topics the candidates should learn for the Cisco 300-610 exam, success is only possible if they have a hold over dependable and updated study resources. It is recommended to begin with official training since whatever options the vendor offers are trustworthy.
Therefore, applying for the Designing Cisco Data Center Infrastructure (DCID) v7.0 course is the easiest and sure-shot way to master the tested concepts. This is a self-paced training program accessible for 180 days from the date of enrollment. It can be found on the Cisco Learning Network Store and costs $1,500. A video training version is also available.
The best audience for these classes includes system engineers, network engineers, data center engineers, server administrators, and others. Before taking-up training, they should make sure they are well-versed in data center networking, storage and virtualization, alongside the Cisco UCS.
NEW QUESTION 17
A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:
The customers plans to expand the network by 10% over the next two years.
The customer's policy requires physically separated infrastructure to support high availability.
Which solution should be used to meet these requirements?
- A. Collapsed-core
- B. Edge-core-edge
- C. Core-edge
- D. Mesh
Answer: C
Explanation:
Please review this question.
NEW QUESTION 18
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates a single fabric port channel.
- B. Cisco UCS Manager creates two separate fabric port channels.
- C. Each uplink that connects an IOM is configured as a discrete link.
- D. The port channel is disabled until an administrator enables it manually.
Answer: B
NEW QUESTION 19
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
- A. management interface
- B. lookup
- C. interface VLAN
- D. Physical interface
Answer: A
NEW QUESTION 20
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Secondary
- B. Updating
- C. Initial
- D. Primary
Answer: C
Explanation:
Section: Automation Design
NEW QUESTION 21
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 22
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. virtual interface
- B. vPC
- C. port channel
- D. physical port
Answer: A
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
NEW QUESTION 23
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 24
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 25
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the disable fips-mode command on each fabric interconnect.
- B. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- C. Run the connect local-management command on each fabric interconnect.
- D. Erase the configuration of both fabric interconnects.
Answer: B
NEW QUESTION 26
A database administrator experiences delay when performing storage replication between primary and secondary data centers. The data centers are located 20 kilometers apart and are connected using a 500 Mbps link. The deployment was implemented using an FCIP tunnel and a pair of Cisco MDS 9250 Series Switches. The network engineer decided to enable QoS to prioritize replication traffic. Which QoS model must be used to resolve the performance issues?
- A. weighted round robin
- B. Resource Reservation Protocol
- C. differentiated services
- D. strict priority queuing
Answer: D
NEW QUESTION 27
Which address pool is used when a vHBA template is created?
- A. UUID
- B. IP
- C. MAC
- D. WWPN
Answer: D
NEW QUESTION 28
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- B. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
- C. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- D. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
- E. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
Answer: A,C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/msx/3_4/solution_overview/ Cisco_VMS_Sol_Overview.pdf
NEW QUESTION 29
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2000 bytes
- B. 9000 bytes
- C. 2240 bytes
- D. 2158 bytes
Answer: A
NEW QUESTION 30
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 31
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?
- A. MACsec
- B. IPsec
- C. L2TPv2
- D. L2TPv3
Answer: A
NEW QUESTION 32
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
- A. PIM anycast RP
- B. Phantom RP
- C. MSDP
- D. Embedded RP
Answer: A
NEW QUESTION 33
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
- A. It propagates hosts reachability without support of traffic flooding.
- B. Layer 3 failures do not propagate beyond the OTV edge device.
- C. It constrains HSRP hello messages to each data center.
- D. It is an open standard.
- E. It extends the spanning tree between data centers.
Answer: B,E
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/ DCI3_OTV_Intro/DCI_1.html
NEW QUESTION 34
......
The Cisco 300-610 exam is one of the requirements for obtaining the CCNP Data Center certification. This test is crafted to check the individuals’ understanding of designing the infrastructure of data centers, including their knowledge of networking, computing, storage networking, as well as automation. This is a concentration exam, which validates your expertise in working with the Cisco networking devices used by the companies worldwide. If you don’t plan to deal with the Cisco 350-601 test to get CCNP Data Center, you will only earn the specialist-level certificate to have proof of your skills.
All in all, each candidate has to pass two exams to get certified. Cisco 350-601 is a core test that validates your knowledge base to prepare it for the specialized skills that you learn while studying for this qualifying exam. It focuses on the specific topics and verifies your expertise in working with data center solutions that imply their implementing, troubleshooting, designing, and configuring. The network engineers and administrators are the ideal applicants for this certification test to demonstrate their skills in taking advantage of scalable automation solutions and securing the infrastructure.
What about Associated Certification?
Exam 300-610 is connected with Cisco’s two notable data center-specific certifications. The first one is CCNP Data Center. It is a professional-level certificate focused on endowing the candidate with in-depth data center knowledge.
The second accreditation is Cisco Certified Specialist – Data Center Design. It validates one’s expertise in building a viable and fully functional data center for Cisco. Both these certifications qualify their holders for specified job roles and hone their skills in a directional manner.
Updated Official licence for 300-610 Certified by 300-610 Dumps PDF: https://www.examdumpsvce.com/300-610-valid-exam-dumps.html
Newly Released 300-610 Dumps for CCNP Data Center Certified: https://drive.google.com/open?id=1Y8xCISk3OfShK--qyqM_nS8VZu8vlrFU
