Ensure Success With Updated Verified 300-610 Exam Dumps [2026]
Exam Materials for You to Prepare & Pass 300-610 Exam.
NEW QUESTION # 198
Refer to the exhibit. A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates a single fabric port channel.
- B. Each uplink that connects an IOM is configured as a discrete link.
- C. Cisco UCS Manager creates two separate fabric port channels.
- D. The port channel is disabled until an administrator enables it manually.
Answer: C
NEW QUESTION # 199
A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects.
Which deployment type resolves the problems with storage contention?
- A. iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
- B. iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
- C. iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode
- D. iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port
Answer: B
NEW QUESTION # 200
A company has several data centers around the world that must be interconnected over Layer2.
The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company.
Which data center technology is recommended to achieve this goal?
- A. OTV
- B. VXLANEVPN
- C. FabricPath
- D. EoMPLS
Answer: B
NEW QUESTION # 201
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the connect local-management command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Run the disable fips-mode command on each fabric interconnect.
Answer: A
Explanation:
There is no way to convert back cluster into two standalone.
https://community.cisco.com/t5/unified-computing-system/break-fabric-interconnect-cluster-into-2- standalone-fabric/td-p/4123885
https://kral2.fr/crash-test-what-happen-when-you-loose-l1l2-on-an-ucsm-cluster/
NEW QUESTION # 202
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.
Which two solutions must be used to meet these requirements? (Choose two.)
- A. Inter-Site Network
- B. DC Interconnect
- C. Spanning Tree Protocol
- D. Distributed Anycast Gateway
- E. VRF-Lite
Answer: B,D
NEW QUESTION # 203
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
* The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
* The port should support management over IP.
Which port type must be used to meet these requirements?
- A. management port
- B. Ethernet port
- C. console port
- D. connectivity management port
Answer: A
NEW QUESTION # 204
Which components share a physical interface in a VDC deployment?
- A. interface VLAN and a VDC
- B. two VDCs for Ethernet traffic
- C. two storage VDCs for FCoE traffic
- D. storage VDC for FCoE traffic and a VDC for Ethernet traffic
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/vdc/config/cisco_nexu s7000_vdc_config_guide_8x/creating-vdc.html
NEW QUESTION # 205
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. inline load-balancing device
- B. Layer 4 to Layer 7 device package
- C. BGP ECMP
- D. ITD
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
NEW QUESTION # 206
A customer is deploying a SAN based on Cisco MDS 9000 Series Switches. Each Inter-Switch Link must carry multiple VSANs at the same time. The access switch must share the same domain ID as the director switch to reduce the number of domain IDs needed in the fabric Drag and drop the operational port types from the right onto the boxes on the left to create a topology that meets these requirements. Not all port types are used. Port types are used more than once.
Answer:
Explanation:
NEW QUESTION # 207
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B-Series servers. Which solution should be included to meet these requirements?
- A. Pin the vNlCs and vHBAs of the service profile to dedicated server ports
- B. Pin the IOM ports of the service profile to dedicated server ports.
- C. Pin the server ports of the service profile to dedicates uplink ports.
- D. Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_010.html#concept_7DE33CE2E37A47C6992C012D51CA37D4
NEW QUESTION # 208
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. system priority
- B. ip arp synchronize
- C. peer-gateway
- D. auto-recovery
- E. delay restore
Answer: D,E
Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html
NEW QUESTION # 209
Refer to the exhibit. FCoE is used in the topology between the SAN Storage devices and SAN- Core routers. After noticing traffic drops to hosts accessing SAN-B storage, the engineering team wants to reduce the oversubscription ratio in the topology. Which action must the team take?
- A. Increase the bandwidth between the SAN-Core and SAN-Edge devices
- B. Increase the bandwidth between SAN-A and SAN-B Storage toward the SAN-Core devices.
- C. Configure QoS to prioritize SAN-A traffic.
- D. Configure QoS to prioritize SAN-B traffic.
Answer: B
NEW QUESTION # 210
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?
- A. Bash shell
- B. Guest shell
- C. Postman
- D. NX-API
Answer: D
NEW QUESTION # 211
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements
* The environment must be separated for test and production purposes
* The separation should include control, data and management plane with fault domain isolation and improved security
* The test environment needs only F2 series line cards and a maximum of 256 VLANs Which set of actions meets these requirements?
- A. Use VDC for each of the environments
Configure limit-resource module-type functionality for the test VDC
Enable limit resource vlan for the test VDC. - B. Use VRF for each of the environments
Configure limit-resource module-type functionality for the test VDC.
Enable module-type for the VRF - C. Use VDC for each of the environments
Configure allow feature set for both VRFs
Enable limit-resource vlan maximum for the test VRF - D. Use VRF faQUMIife environments
Configure allow feature set for both VRFs
Enable limit-resource vlan minimum for the test VRF
Answer: A
NEW QUESTION # 212
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. disables spanning-tree
- B. uses all available uplink bandwidth
- C. no spanning-tree blocked ports
- D. supports Layer 3 port channels
- E. maintains single control plane
Answer: B,C
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/ vpc_best_practices_design_guide.pdf
NEW QUESTION # 213
An engineer must design a Cisco SAN environment between two data centers for backup and replication purposes. The data centers are separated by 510 kilometers and are interconnected via a 16-Gbps WAN/MAN link. Which topology must be used to interconnect the data centers?
- A. large-scale edge-core-edge
- B. unified fabric
- C. multi-switch
- D. native Fibre Channel SAN extension
Answer: B
NEW QUESTION # 214
The network infrastructure team is beginning to automate routine tasks within the Cisco ACI fabric and is searching for the appropriate solution The solution must not require any additional software installed on the Cisco APIC Networking team members lack automation experience and prefer to use a tool that does not require in-depth programming knowledge Finally configuration within the Cisco ACI fabric is rarely modified or removed Which solution must the team choose?
- A. Terraform
- B. Puppet
- C. Cobra SDK
- D. Ansible
Answer: D
NEW QUESTION # 215
An engineer must provide Layer 2 adjacency between data centers that are in two locations and separated by a routed network The adjacency must be based on Cisco Nexus 7000 Series Switches The solution must offload learning of host reachability information to the control plane to avoid excessive flood and learn congestion Also the data center in one of the sites experiences a large volume of unknown unicast traffic that the solution must mitigate Which data center interconnect technology meets these requirements?
- A. VPLS
- B. OTV
- C. VXLAN
- D. LISP
Answer: C
NEW QUESTION # 216
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. in the hardware on the Cisco UCS VIC 12xx adapter or later
- B. in the hardware on any Cisco UCS VIC adapter
- C. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- D. on the host, by using multipathing software
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 217
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 218
Refer to the exhibit.
Refer to the exhibit. A 4x10G Fibre Channel has been configured between SW1 and SW2 to carry backup traffic sourced to and from the SAN. An engineer noticed that 10G Link 1 is being used more heavily than the other links within the port channel. Which action must the engineer take on the two switches to ensure that the traffic uses all available links between SW1 and SW2?
- A. Configure dst-mac-based load-balancing.
- B. Configure src-dst-ip-based load-balancing.
- C. Configure exchange-based load-balancing.
- D. Configure flow-based load-balancing.
Answer: C
NEW QUESTION # 219
Drag and Drop Question
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1238898
NEW QUESTION # 220
......
Updated 300-610 Certification Exam Sample Questions: https://www.examdumpsvce.com/300-610-valid-exam-dumps.html
Pass Your 300-610 Exam at the First Try with 100% Real Exam: https://drive.google.com/open?id=12iIInxOnHGI7LKZgSx1oyLuTTjcVH4xE
